★ Tips 1
When camping, do not rush to use the camp post. If you want to complete the covering in the shortest possible time, it may sometimes cause cracks in the camp post or looseness of the metal ring. It is best to carry a section of three-inch aluminum alloy pipe for standby.
★ Tips 2
Different manufacturers have different designs for studs, ranging from six to eight inches, T-shaped, I-shaped, or half moon shaped, and spiral studs are designed for hard ground, rock, or snow. Of course, the trunks or branches near the camp, and the roots of the trees can also be camp nails.
★ Tips 3
After the construction of the camp, put unnecessary items into the tent cover. If the camp column joints become loose, use adhesive tape to stick them tightly. If a part of the tent is lost, it will make it impossible to combine the tent. If you want to have a good dream in mountainous areas, it is best to pay attention to some joints on weekdays, such as corners, camp column joints, and strengthen them, even if there is no problem in bad weather.
★ Tips 4
The four corners of the tent should be fixed with ground nails. Before going to bed at night, check whether all the flames have been extinguished and whether the tent is firmly fixed. Before folding and tidying up the tent, dry it in the sun and then wipe it clean. During the snow season, use snow to wipe it clean. Do not dirty the sleeping bag, or turn the tent upside down and dry it before wiping it clean.
